Netskope's Virtual Appliance can be installed on VMware ESX 6.5 or later, Microsoft Hyper-V, Linux KVM, and AWS AMI.
Before you begin, decide whether the appliance will be setup as OPLP, Secure Forwarder, or a proxy server. Depending on the intended setup you can add one, two, or three network interfaces.
An OPLP or DPoP appliance will only require a single interface to connect to the Netskope cloud. For more information on setting up a Virtual Appliance as an OPLP, see Configure the Interfaces.
A Secure Forwarder appliance can require up to three interfaces based on your network. For more information on setting up a Virtual Appliance as a Secure Forwarder, see Configure the Virtual Appliance.
The following table provides the md5sum and sha256sum values for the Virtual Appliance installer files on VMware ESX, Microsoft Hyper-V, and Linux KVM platforms for version 103.0.0.338.
File Type | md5sum | sha256sum |
|---|---|---|
ESX OVA | 39a3615d1540afb5ff28c7e0801c5968 | 56b5756f90a6f175dcfbcc5675885344010c0477ed03017322be32322bcf5a91 |
Hyper-V Image | 519b1545022cef420e1bb07d6d07aff1 | 7d3e23007a56c09c5a8118da0409ad0c485302fc52781372a11cb804568fd0f8 |
KVM Image | 2a28a5e0dc51f92d83204934c3f5e2b1 | 3298797d857347e60faaa9071509d216e802429e7dfbfd304339fc97ed92c375 |
The following topics provide detailed instructions to install the VA on any of the supported platforms.