Skip to main content

Netskope Help

Network Location Profile

You can add a single object or multiple object network location.

  1. Go to Policies > Profiles > Network Location > New Network Location and select either Single Object or Multiple Objects.

  2. To add a single object, provide an IP address, IP address range, or a CIDR netmask, When finished, click the adjacent + button, and then click Next. Enter a name for the network location, and then click Save Network Location.

    IP address range and CIDR netmask examples: 10.0.0.1-10.0.0.100, 10.0.0.0/22

  3. To add multiple objects, upload a CSV file with multiple IP addresses or ranges. Enter a name for the network locations, and then click Save Network Location.

  4. When finished, click Apply Changes.