Skip to main content

Netskope Help

Fixed Issues for Virtual Appliance Version 103.0.0.338

The following fixed issues are included in this release.

Issue Number

Issue

Description

224327

Show route command not working with ipv6 interface

New CLI added to display IP routes: CLI > show route main <v4|v6> CLI > show route interface <interface_name> <v4|v6>

For example: show route interface dp1 v4

Note

The show route interface ... command only works if all of the following conditions are met:

1. The interface is not configured as the default gateway.

2. The interface does not have DHCP enabled.

3. TAP is not enabled on the interface.

4. The IP address, gateway, and netmask are all configured on the interface.

130282

While upgrading OPLP, the software errors out due to not enough disk space

After an upgrade, old files are cleaned up to reduce the probability of running into space related issues.

249742

Unable to clear OPLP infrastructure alert "1 file not uploaded within24-48 hours"

Alarm of "1 file not uploaded within 24-48 hours" is not raised due to incorrect processing of a log file of 0 bytes. The processing of such a file has been corrected.