Install a Virtual Appliance
Netskope's Virtual Appliance can be installed on VMware ESX 6.5 or later, Microsoft Hyper-V, Linux KVM, and AWS AMI.
Before you begin, decide whether the appliance will be setup as OPLP, Secure Forwarder, or a proxy server. Depending on the intended setup you can add one, two, or three network interfaces.
An OPLP or DPoP appliance will only require a single interface to connect to the Netskope cloud. For more information on setting up a Virtual Appliance as an OPLP, see Configure the Interfaces.
A Secure Forwarder appliance can require up to three interfaces based on your network. For more information on setting up a Virtual Appliance as a Secure Forwarder, see Configure the Virtual Appliance.
Hash values for Virtual Appliance Installation Files
The following table provides the md5sum and sha256sum values for the Virtual Appliance installer files on VMware ESX, Microsoft Hyper-V, and Linux KVM platforms for version 103.0.0.338.
File Type | md5sum | sha256sum |
|---|---|---|
ESX OVA | 39a3615d1540afb5ff28c7e0801c5968 | 56b5756f90a6f175dcfbcc5675885344010c0477ed03017322be32322bcf5a91 |
Hyper-V Image | 519b1545022cef420e1bb07d6d07aff1 | 7d3e23007a56c09c5a8118da0409ad0c485302fc52781372a11cb804568fd0f8 |
KVM Image | 2a28a5e0dc51f92d83204934c3f5e2b1 | 3298797d857347e60faaa9071509d216e802429e7dfbfd304339fc97ed92c375 |
The following topics provide detailed instructions to install the VA on any of the supported platforms.